JMD PETRO PRODUCTS

+91-9555241991 (India) +977-9810574451 (Nepal)
Email: jmdpetroproducts@gmail.com

Stay Connected:

OUR PRODUCTS

SUPER Range Products

JMD'S POLYMER MODIFIED BITUMEN

S.No	Products	Meets or exceeds the following Specifications	Recommended for
1	PMB (40E)	IRC SP 53-2010/IS:15462-2004	Hot Climate Areas
2	PMB (40P)	IRC SP 53-2010/IS:15462-2004	Hot Climate Areas
3	PMB (40E)	IRC SP 53-2010/IS:15462-2004	Moderate Climate Areas
4	PMB (40E)	IRC SP 53-2010/IS:15462-2004	Moderate Climate Areas

JMD'S CRUMB RUBBER MODIFIED BITUMEN

S.No	Products	Meets or exceeds the following Specifications	Recommended for
1	CRMB 50	IRC SP 53-2010/IS:15462-2004	Cold Climate Areas
2	CRMB 55	IRC SP 53-2010/IS:15462-2004	Moderate Climate Areas
3	CRMB 60	IRC SP 53-2010/IS:15462-2004	Hot Climate Areas

JMD'S CATIONIC BITUMEN EMULSION

S.No	Products	Meets or exceeds the following Specifications	Recommended for
1	RS-1	IS : 8887 - 2004	Tack coat
2	RS-2	IS : 8887 - 2004	Surface Dressing/Grouting/ Penetration Macadam
3	MS	IS : 8887 - 2004	Pot Hole Repair/Patch Hole/ 20mm Pre-Mix Carpet
4	SS-1	IS : 8887 - 2004	Prime coat for absorptive surface
5	SS-2	IS : 8887 - 2004	Prime Coat/ Fog Seal/Crack Seal/Slurry Seal/ Premix Seal Coat
6	CSS-1	ASTM D 2397	Prime Coat, slurry seal, premix seal coat and fog seal

JMD'S BLOWN BITUMEN

S.No	Products	Meets or exceeds the following Specifications	Recommended for
1	Blown Bitumen Grade 85/25	IS : 702-1988	Mainly used for road Mastic.
2	Blown Bitumen Grade 90/15	IS : 702-1988	Widely used for water-proofing of roof tops , making bitumen felt and lamination industries.
3	Blown Bitumen Grade 30/40	IS : 702-1988	Mainly used for internal road society, apartment, warehouses & taxi-drive of Airports.
4	Blown Bitumen Grade 115/15	IS : 702-1988	Mainly used black Japan paints, printing inks etc.

JMD'S BITUMEN GRADE

S.No	Products	Meets or exceeds the following Specifications
1	VG - 10	IS : 73-2013
2	VG - 30	IS : 73-2013
3	VG - 40	IS : 73-2013

JMD'S JOINT EXPANSION FILLER BOARD

S.No	Size	Density	Meets or exceeds the following Specifications	Recommended for
1	12 mm	300 Kg/cum	IS:1838(part 1)-1983	It’s a filler in the joints of concrete road, runways, building and ware houses. It protects the expansion & contraction of the structure which occurs due to seasons variations.
2	18 mm	300 Kg/cum	IS:1838(part 1)-1983	It’s a filler in the joints of concrete road, runways, building and ware houses. It protects the expansion & contraction of the structure which occurs due to seasons variations.
3	25 mm	300 Kg/cum	IS:1838(part 1)-1983	It’s a filler in the joints of concrete road, runways, building and ware houses. It protects the expansion & contraction of the structure which occurs due to seasons variations.

JMD'S BITUMEN FELT

S.No	Products	Meets or exceeds the following Specifications	Recommended for
1	Bitumen felt(Hessian based)	IS: 1322-1993	Recommended for waterproofing of houses & apartments, go-downs & warehouses, buildings, all roof tops made of concrete asbestos sheet,G.I. sheet etc.
2	Bitumen felt(Fiber based)	IS:7193-1994	Recommended for waterproofing of houses & apartments, go-downs & warehouses, buildings, all roof tops made of concrete asbestos sheet,G.I. sheet etc.

JMD'S BITUMEN FELT

JMD'S Bitumen Emulsions

JMD'S Bitumen Cutback

JMD’S Bitumen sealing compound

JMD'S Bitumen Plast

JMD'S Bitumen Silver Paint

JMD'S Bitumen Mastic Slab

JMD'S Bitumen Bond

JMD'S Bitumen Kote

General Uses Of Bitumen
For civil engineering works:	Industries:
• Constructions of roads, runways and platforms. • Water proofing to prevent water seepage. • Mastic floorings for factories and godowns. • Canal lining to prevent erosion. • Dump-proof courses for masonry. • Tank foundation. • Joint filling material for mason	• Electrical cables and junction boxes. • In battery manufacture as sealing compound. • Paint industries for manufacturing black paints and anti corrosive paints. • Ceramics. • Printing inks. • Water proof papers. • Electrical capacitors. • Bituminous felts.